Home > Sawing > Horizontal Bandsaws Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Horizon
  • Model:
  • Amada HA250W automatic horizontal bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Amada HA250W automatic horizontal bandsaw The Amada HA250W automatic horizontal bandsaw is a reliable workhorse industrial bandsaw machine designed around the capability of the saw blade, therefore guaranteeing optimum cutting performance. Utilising a 34mm wide blade the Amada HA250W automatic horizontal bandsaw has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 250mm, thus delivering an excellent cost-per-cut ratio. This simple robust bandsaw machine has often been imitated, however never surpassed. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 250 mm round bar Rectangular bar: 300mm wide x 250mm high Automatic, powered chip conveyor Multiple index up to 9 times Split front vice Clamps the cut piece in front of the blade to reduce break-off tags. Simple operation Amada performance bandsaw blades Saw service and spares For larger capacity, see the Amada HA400W Compact and robust completely automatic band saw machines in stable swivel joint design for economic cutting of solid, shaped and hollow materials in all material qualities including Inconel, Hastelloy and titanium – individually or in a bundle. In automatic operation, the cut-off length and piece count can be preselected. The combined feed pressure system has the benefit of selecting the feed pressure according to the sawing task. For example, constant pressure for difficult to cut solid material, load-dependent feed for tubes and profiles. Short cycle times due to patented material scanner with automatic changeover from rapid feed to feed. An integrated chip conveyor is included in the basic equipment. The HFA models also have an automatic zero stop for material start detection. The NC controller provides the requirement for automatic sawing using selectable cut-off lengths from 0 to 470 mm, with multiple infeed up to 9999 mm. For a full specification, demonstration or quotation call now on 01274 870311.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Addison
      Model:
      Addison Bandmaster
      Description:
      ManualCutting Capacity: 300MM X 350MM

      More Info

    • Manufacturer:
      Horizon
      Model:
      Amada HA400W horizontal automatic bandsaw
      Description:
      Bandsaw Machine HA400W Amada designed the HA400W horizontal automatic bandsaw starting from the material to be sawn, engineering the machine around the capability of the saw blade, therefore guaranteeing optimum cutting performance. Utilising a 41mm ...

      More Info

    • Manufacturer:
      Horizon
      Model:
      AJAX 9” Horizontal Bandsaw
      Description:
      Capacity 9” Dia roundsSwivel viceSpindle Speeds: Variable belt changeBearing blade guidesWire brushCoolant

      More Info

    • Manufacturer:
      Model:
      Band saw
      Description:
      {"Cut range:": "", "Round": "120 mm", "Square": "120 mm", "Flat": "120x130 mm", "Cutting range with mitre angle 45\u00b0:": "", "Cutting range with mitre angle 60\u00b0:": "", "Cutting speed:": "", "from": "36 m/min", "up to": "72 m/min", "Band lengt...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User